Volkswagen Sharan heater

Car: Volkswagen Sharan
Model Year: 2002
Categories: Leaks & Noises
My heater has stopped working. The engine temp is normal and the thermostat has been changed and the control pannel inside the car has been changed. The heater matrix has been flushed through with water. The air vents seem to work ok and the fan works ok in pisition four. If I let the engine warm up then put on fan position 4 it will blow warm for about half a minute then goes cold. The fan is not working in positions 1, 2, and 3.
Posted: Mar 11, 2013 (11 years ago)
The fan only working in position 4 is usually the ballast resitor .
Posted Mar 11, 2013 (11 years ago)
Getting no heat sounds like the flap is not operating inside heater box for whatever reason . May be a faulty flap actuator /motor or jammed .
Posted Mar 11, 2013 (11 years ago)
Re. the ballast resistor , this refers to manual air con .If not you may need a blower motor control unit ( Hedgehog ) .You shouild also verify that both heater hoses going to the heater matrix are both hot .
Posted Mar 11, 2013 (11 years ago)
try vwforum.co.uk
Posted Mar 11, 2013 (11 years ago)
You could substitute your resistor with a headlight bulb to check it ,as that will alter the resistance and alter fan speed ,it,s an old test.I also wonder if you are getting the correct coolant circulation,are the top and bottom radiator hoses both similar temp.If not then it maybe water pump impeller issue as the plastic ones were prone for falling off.
Posted Mar 12, 2013 (11 years ago)

This problem is archived

If you're having a similar problem please click below to re-post this problem, you can then customise it to suit your situation.

Join the community
Got a question? Can you answer other questions here? If so please...
More problems with the 2002 model year Volkswagen Sharan

We have 14 problems and solutions in our database for this model year of the car.

View all Volkswagen Sharan Problems