Vauxhall Vectra seat belt

Former post on same problem ,

Vauxhall Vectra want to know how 2 access rear centre seatbelt


Vauxhall Vectra
Year
2003



Posted

28/09/2010


The Problem

want to know how 2 access the rear centre seatbelt because it does not cum out of its holder

Solution 1






whittingehame
Legend
Since: Oct 2009

Posts: 445 | Fixes: 7805
View Profile/Car


Suggested Solution

--------------------------------------------------------------------------------
Vectra Rear Seatbelt stuck .


VxON Elite Join Date Apr 2005
Posts 5,581
you need to get to the bolt which holds secures the seat belt to the floor,this may involve unbolting the rear seat,go to a vaux dealer and get a astra seat belt stop(not the one to stop the buckle going down too far)this stop stops the belt from going in too far,there should be a slot in the buckle for this purpose or for the time being plug the buckle into the centre seat buckle when you need to fold the rear seat down,as you guessed i had a vectra estate and the same happened to me,





--------------------------------------------------------------------------------
Posted on Tuesday 28th of September 2010

seat belt inside rear seat rest need to remove do i need to remove seat cover
Solution 2


whittingehame
Legend
Since: Oct 2009

Posts: 445 | Fixes: 7805
View Profile/Car


Suggested Solution

--------------------------------------------------------------------------------
Remove seat base , this explains .

Firstly, the seat belt retraction mechanism for the rear middle seat will lock when the seat is = > 3% off centre, so it won't release until the seat is firmly back and clipped into possition, as pointed out by the other guy with the wood chips, even a rear seat cover can prevent it from a firm connection which will cause the belt to jam. Don't bother taking it to the dealership as they will give you the best option for them... not for you $$$$$.

It's an easy thing to fix providing you have the right tool, that being a T50 torx socket. use the torx socket to remove the bolt securing the base plate that the bottom end of the seat belt is attached to. It's located on the floor pan behind the rear seat (the lower rear seat is secured by 2 clips).

Once the base plate is removed you should be able to clip the (back rest) seat firmly into position, check that there are no obstructions and ensure the seat is really firmly secured. Once this is done the counter weight will free itself allowing you to pull the seat belt out and reattach the base plate.

Further, this has been addressed on later models, they put a small plastic stud in the seat belt to prevent it from fully retracting, try putting a strong saftey pin in the belt to stop it going all the way in again and good luck!!