Peugeot 307 electrics
Variant: 1.6
Model Year: 2002
Categories:
Leaks & Noises
i was removing the radio , i seen a little spark now nothing on the dashboard works ,please help
Posted: Feb 22, 2013 (11 years ago)
Check fuses .
Posted Feb 22, 2013 (11 years ago)
Have you had a look at this similar problem: electrics
This message was auto-generated based on a user suggestion.
This message was auto-generated based on a user suggestion.
Posted Feb 22, 2013 (11 years ago)
i wouldnt now where to start as i dont have the manual for the car
Posted Feb 22, 2013 (11 years ago)
havnt got manual for the car ,so dont no which fuse it would be
Posted Feb 22, 2013 (11 years ago)
Dont know too much about the electrics on that car to be honest but found this reference to dash panel light fuse , might help[ you .
BSI Fuse 24 Blown
--------------------------------------------------------------------------------
Model: PEUGEOT 307
Symptoms: All lights on dash blacked out, instruments, radio, and multifunction display not working.
Description of the problem -There has been one known instance where the instrument panel harness has rubbed and worn through on the sharp edges of the steering column bracket. Consequently a wire short-circuited to ground which caused fuse 24 in BSI to blow. The damage to the harness was about 20 cm back from the instrument panel terminal.
The repair was not very difficult. The damaged wire was repaired with insulating tape and the harness secured to the steel bracket.
We believe the same problem could occur in any other 307 where the wiring harness is not correctly secured.
BSI Fuse 24 Blown
--------------------------------------------------------------------------------
Model: PEUGEOT 307
Symptoms: All lights on dash blacked out, instruments, radio, and multifunction display not working.
Description of the problem -There has been one known instance where the instrument panel harness has rubbed and worn through on the sharp edges of the steering column bracket. Consequently a wire short-circuited to ground which caused fuse 24 in BSI to blow. The damage to the harness was about 20 cm back from the instrument panel terminal.
The repair was not very difficult. The damaged wire was repaired with insulating tape and the harness secured to the steel bracket.
We believe the same problem could occur in any other 307 where the wiring harness is not correctly secured.
Posted Feb 22, 2013 (11 years ago)
This problem is archived
If you're having a similar problem please click below to re-post this problem, you can then customise it to suit your situation.
Join the community
Got a question? Can you answer other questions here? If so please...
More problems with the 2002 model year Peugeot 307
We have 125 problems and solutions in our database for this model year of the car.
View all Peugeot 307 Problems
307 Recalls (24)
Parts mentioned