Peugeot 306 cutting out when accelerating

Car: Peugeot 306
Variant: 2.0hdi
Model Year: 2000

Categories: Running Rough, Starting & Power Loss

hi,i need help,
recently bought a 306 hdi 2.0 x reg (2000)
when driven steady by only just putttin foot on accelerator car drives fine but when pressed a little harder engine just cuts off. if i turn ignition off for 3 seconds for relay to reset it starts fine and drives but soon as i accelerate it happens again,
its had a new
hp pump
lp pump
fuel pressure sensor
airflow sensor
fuel filter
i had it on a diagnosticmachine it said 2 unknow faults air flow sensor and fuel pressure sensor (these were changed after dianostic)
if anyone could help id really appreciate it thanks paul

Posted: Dec 6, 2010 (13 years ago)

t1lissa

Points: 1

Probably an injector away it needs a back leak test done on it you measure the fuel out the top of the injectors done while the engine is running at idle, My guide is if the best result is twice the worse change the injector with the worst if the fuel in the wee bottles is about level drive the car till it faults (light on plays up or the bottles fill) if the back leak check shows nothing i would need to see it for myself. :)

Posted Sep 2, 2011 (13 years ago)

dieselal

Points: 57

This problem is archived

If you're having a similar problem please click below to re-post this problem, you can then customise it to suit your situation.

Join the community

Got a question? Can you answer other questions here? If so please...

Join our forums

Peugeot 306 cutting out when accelerating

More problems with the 2000 model year Peugeot 306