Peugeot 206 passenger door actuator replacement

Not sure on this model but most are just held on with a plastic eyelet that clips round the rod,and if you can not unclog it at the lock end just disconnect at the handle end and take the whole lot out .

Yeah mine has eyelets, wouldn't come out so removed indoor handle and then uncliped rods, unhooked from outer handle and out it came, snapped the top rod a little but found something handy in the garage to keep it in place again... Actuator I have turns out works, the electrical cable works good, turns out I need a 9pin to replace with so had to throw away the 6pin replacement I bought and order a 9 pin.. Then take it apart again.. And reattach new actuator .. Hopefully this does the trick!

YES IT WORKED! Replaced 9pin actuator, and worked first time, even the indicators now flash when locked/unlocked, orignally none of the locks were working due to that one dead actuator, had a Auto electrican fit a cheap 3rd party replacement, could lock driver side and boot but not the passanger side, paid £80 to get it fitted.. however turns out all because of that actuator the whole lot didnt work! Job done guys!