Mitsubishi Pajero changed thermostate still no heating ????

have you got manual heater controls or electric?in either case would check the cable or servo for heater temp valve to make sure moving freely,

Check temp of both hoses going into heater matrix . Also check this ,

chrispajero
*****



Location: Posted: Sat Nov 21, 2009 16:19 Post subject:

--------------------------------------------------------------------------------

I have the manual heater controls on my 2.5, I was looking at it recently and there is no water valve, just a flap that shuts off the air blowing over the matrix. Maybe this is your problem, on mine the cable controlling the flap had come off it's clamp allowing the outer cable sheath to move instead of the inner cable.

and this


Posts: 402
Location: birmingham/halesowen
Posted: Sun Dec 06, 2009 15:10 Post subject:

--------------------------------------------------------------------------------

well i have finally sorted it ! i tried the park on a hill and top up as bubbles flowed ect but finally sorted it by conecting the garden hose direct to the left hanD side of the matrix and turning the tap on full it just trickled from the right hand side of the matrix at first and the stuff coming out was brown sludge,after 5 mins it was running clear i then reversed the hose and sent the water the other way,and re conected them matrix to the cooling system to check it worked ___ it did !!
i have drained the system now refilled with coolant and alls good thanks for your help

i have the digital heater system.i shall try the garden water hose onto the heater matrix pipes,firstly and then go from there.thanks.