MG ZR power loss
Variant: 2.0 TD
Model Year: 2003
Categories:
Running Rough, Starting & Power Loss
The car lost power from start up, the engine management light did not come on. took it to the garage who said it was the mass airflow. They put a new one on but it did not cure the problem (leaving it disconnected did though). They then said it was low voltage from the ECU and could possibly send the ECU away for repair.
They re-connected the mass airflow and i drove the car home which seems to be working at about 75% of normal. Has been like that now for a week with no more problems. Could it be a damaged wire or dodgy connection somewhere?
They re-connected the mass airflow and i drove the car home which seems to be working at about 75% of normal. Has been like that now for a week with no more problems. Could it be a damaged wire or dodgy connection somewhere?
Posted: Jul 23, 2011 (13 years ago)
if the signal from ecu is poor pull out the ecu unplug and check condition of pins, they are very small and corrode quite easilly carefully clean up and reasemble, however is this was the case you would have a fault code listed, make sure your garage is able to read MG properly as a lot of scanners won't read them properly if at all
Posted Jul 23, 2011 (13 years ago)
This problem is archived
If you're having a similar problem please click below to re-post this problem, you can then customise it to suit your situation.
Join the community
Got a question? Can you answer other questions here? If so please...
More problems with the 2003 model year MG ZR
We have 21 problems and solutions in our database for this model year of the car.
View all MG ZR Problems