Mazda 323 missfire
Variant: 1.3 5Dr 125000 Miles
Model Year: 2000
The Car starts and drives fine from cold. When the Car is warmed up if you are either taking off from a junction or going uphill i.e. anytime the Car is under a little pressure there is a noticeable Missfire. I presume it is a Sensor issue but which Sensor and where is it located exactly. As always many thanks for your help.
Posted: Nov 27, 2014 (9 years ago)
Not sure what is fitted to that year and engine but would have thought it was more likely to be a plug lead or pencil coil breaking down under load .Also suggest carefully cleaning MAFsensor .
Posted Nov 27, 2014 (9 years ago)
Sorted - The issue was the following;
A new set of Plug Leads were put on the Car recently. The Sleeves that fit over the Plugs were too long and the contact was not fitting correctly on the top of the Plugs. Circa 2cm was cut off of the Sleeves, the contacts are now sitting properly on the Plugs and the Car is running as it should.
Thanks for the assistance again.
A new set of Plug Leads were put on the Car recently. The Sleeves that fit over the Plugs were too long and the contact was not fitting correctly on the top of the Plugs. Circa 2cm was cut off of the Sleeves, the contacts are now sitting properly on the Plugs and the Car is running as it should.
Thanks for the assistance again.
Posted Dec 12, 2014 (9 years ago)
This problem is archived
If you're having a similar problem please click below to re-post this problem, you can then customise it to suit your situation.
Join the community
Got a question? Can you answer other questions here? If so please...
More problems with the 2000 model year Mazda 323
We have 2 problems and solutions in our database for this model year of the car.
View all Mazda 323 Problems
323 Recalls (1)
Parts mentioned