Ford Mondeo alarm.
Variant: 1.8 LX
Model Year: 1996
Categories:
Electrics, ECU, Warnings & Lights
MONDEO 1996.THE ALARM WORKED BEFORE
I SET OFF.IT SET ON THE PASSENGER SIDE NOW.
BUT WILL NOT SET ON DRIVERS SIDE.
I SET OFF.IT SET ON THE PASSENGER SIDE NOW.
BUT WILL NOT SET ON DRIVERS SIDE.
Posted: Feb 21, 2013 (11 years ago)
Strip down door trim and check lock linkage and actuator .
Posted Feb 21, 2013 (11 years ago)
Check wiring at front a pillar for corrosion.
Posted Feb 21, 2013 (11 years ago)
These Ford alarms have a self test feature. Open the bonnet had press the alarm switch in and out several times quickly. The horn should beep a few times to tell you it has gone into test mode. Then go round and open each door and tailgate in turn and the horn should beep. Put the key in the door locks and lock and unlock and the horn should beep. No beep indicates a fault. The most likely fault is the operating switch in the drivers door. this is a small microswitch built into the actual latch assembly.
Posted Feb 28, 2013 (11 years ago)
This problem is archived
If you're having a similar problem please click below to re-post this problem, you can then customise it to suit your situation.
Join the community
Got a question? Can you answer other questions here? If so please...
More problems with the 1996 model year Ford Mondeo
We have 13 problems and solutions in our database for this model year of the car.
View all Ford Mondeo Problems
Mondeo Recalls (27)
Parts mentioned