Ford Focus abs light on
Variant: 1.8Tdci
Model Year: 2000
Categories:
Steering, Suspension, Brakes, Wheels & Tyres
Hi peeps, im new to this and dont know too much about cars, my problem is that my ABS light stays on!!!
I renewed the sensor as the diagnostic test told me it was my front right sensor, but my light went out when i drove it then came on again after about 8seconds, what might the problem be?
I have been told to take it out again give it a rub with a little grease or vaseline as the sensor might be over sensitive with it being brand new, i don't know, i hope someone can be of some help to me on this as it's now getting very frustrating and very close to my MOT renewal date.
The car is an o5 plate but its the old mark 1 shape
I renewed the sensor as the diagnostic test told me it was my front right sensor, but my light went out when i drove it then came on again after about 8seconds, what might the problem be?
I have been told to take it out again give it a rub with a little grease or vaseline as the sensor might be over sensitive with it being brand new, i don't know, i hope someone can be of some help to me on this as it's now getting very frustrating and very close to my MOT renewal date.
The car is an o5 plate but its the old mark 1 shape
Posted: Jul 14, 2011 (13 years ago)
try cleaning the sensor ring that the actual sensor detects ,you can sometimes do it through the sensor hole use some cleaner and maybe a cable tie poked through the hole as you turn the wheel. dont use anything too hard or you may damage the sensor ring
Posted Jul 14, 2011 (13 years ago)
Just to add to " wiggy4170 " solution . Dont " give it a rub with a little grease or vaseline " . all that will do is cause all brake dust / dirt etc . to stick to it and knacker it .
Posted Jul 14, 2011 (13 years ago)
Like WD40? using this as a solution maybe
Posted Jul 14, 2011 (13 years ago)
brake parts cleaner would be better
Posted Jul 14, 2011 (13 years ago)
Just drove it to shops and back, the light went out for about 10 seconds but it's back on again, since the sensor has been in it has driven about 17 miles, could it just be it needs time to reset or do you think it's dirt or whatever, like just needing a clean inside the hole where bolt goes.
Posted Jul 14, 2011 (13 years ago)
This problem is archived
If you're having a similar problem please click below to re-post this problem, you can then customise it to suit your situation.
Join the community
Got a question? Can you answer other questions here? If so please...
More problems with the 2000 model year Ford Focus
We have 75 problems and solutions in our database for this model year of the car.
View all Ford Focus Problems
Focus Recalls (53)