Fiat Punto ecu
Variant: 13jdt grande
Model Year: 2009
Categories:
Running Rough, Starting & Power Loss
engine wont start inertia switch in ecu wont switch back on ecu been tested every thing fine with it but still wont start no fuel getting to injectors bin told its ecu again will any fiat diesel 13 jdt ecu work on car if programed to it
Posted: Nov 13, 2013 (11 years ago)
?
Little confused here!
granted the only fiat manual I have here is for the "doblo" but the inertia switch is clearly shown on the engine firewall/bulkhead,not internal to the ecu!
So,when in doubt,bypass!
Relay 10 is the bugger but the cut out is the earth path,so run an earth to the pump and see if it runs.
you need to establish if the pump in the tank is working.
if it runs,the tank pump that is,try to start it then,if it does then you need to look at relay 10 and it's wiring,feeds.
Little confused here!
granted the only fiat manual I have here is for the "doblo" but the inertia switch is clearly shown on the engine firewall/bulkhead,not internal to the ecu!
So,when in doubt,bypass!
Relay 10 is the bugger but the cut out is the earth path,so run an earth to the pump and see if it runs.
you need to establish if the pump in the tank is working.
if it runs,the tank pump that is,try to start it then,if it does then you need to look at relay 10 and it's wiring,feeds.
Posted Nov 15, 2013 (11 years ago)
This problem is archived
If you're having a similar problem please click below to re-post this problem, you can then customise it to suit your situation.
Join the community
Got a question? Can you answer other questions here? If so please...
More problems with the 2009 model year Fiat Punto
We have 12 problems and solutions in our database for this model year of the car.
View all Fiat Punto Problems
Punto Recalls (12)