Citroen Xsara clutch
Variant: 2.0 exclusive
Model Year: 1999
Categories:
Gearbox & Clutch
I cannot separate the gearbox from the engine because its semms to be "hanging" on something inside. Any idea what it could be ?
Posted: Apr 1, 2013 (11 years ago)
It would seem from the txt below that you have to get the box dead square to engine and some kind of hoist is useful to take weight.
The paragraph below was taken from the following link
http://www.frenchcarforum.co.uk/forum/viewtopic.php?f=3&t=40936
"Decent stud remover required to remove the gearbox mounting stud on the top of the box
It's much easier with an overhead lift of some sort to support the box - must be damn near impossible to get the box in / out and remounted on jacks".
Hope it helps.
The paragraph below was taken from the following link
http://www.frenchcarforum.co.uk/forum/viewtopic.php?f=3&t=40936
"Decent stud remover required to remove the gearbox mounting stud on the top of the box
It's much easier with an overhead lift of some sort to support the box - must be damn near impossible to get the box in / out and remounted on jacks".
Hope it helps.
Posted Apr 1, 2013 (11 years ago)
Make sure you have removed all the bolt,s it,s probably just stuck on the dowels.a good lever should remove it.
Posted Apr 1, 2013 (11 years ago)
^x2 though had the odd one or two on different cars where the flywheel bearing / bush came out with the spigot shaft .
Posted Apr 1, 2013 (11 years ago)
This problem is archived
If you're having a similar problem please click below to re-post this problem, you can then customise it to suit your situation.
Join the community
Got a question? Can you answer other questions here? If so please...
More problems with the 1999 model year Citroen Xsara
We have 8 problems and solutions in our database for this model year of the car.
View all Citroen Xsara Problems
Xsara Recalls (8)
Parts mentioned