Citroen Xsara Picasso knock on start up from engine
Variant: 5 door
Model Year: 2005
Categories:
Running Rough, Starting & Power Loss
Engine knocks on start up.
Suspect the lower rear engine mounting. Top engine mounting on the right-hand side looks as the engine is tilted towards the rear of the car. Can the lower mounting be replaced in postion or does the mounting assembly require removing to replace the mounting rubber.
Suspect the lower rear engine mounting. Top engine mounting on the right-hand side looks as the engine is tilted towards the rear of the car. Can the lower mounting be replaced in postion or does the mounting assembly require removing to replace the mounting rubber.
Posted: Aug 9, 2013 (11 years ago)
i dont think you could remove bush with bracket on engine you would more than likely damage the alloy housing dare say there is a tool for doing it but if it is worn you are going to have to remove o/s drive shaft fixing bolt to bush (make sure bolt not been loose and worn)then remove bracket from engine at this point better to take bracket and new bush to engineering shop to get bush pressed out and new pressed in then re-assemble but before doing all this work might be better if can put car on a ramp and check for movement while some one starts and stops engine to make sure it is bush at fault
Posted Aug 9, 2013 (11 years ago)
This problem is archived
If you're having a similar problem please click below to re-post this problem, you can then customise it to suit your situation.
Join the community
Got a question? Can you answer other questions here? If so please...
More problems with the 2005 model year Citroen Xsara Picasso
We have 76 problems and solutions in our database for this model year of the car.
View all Citroen Xsara Picasso Problems